Manual Handling: An Overview

Cover image for: Manual Handling: An Overview
CPDTime.
9m
Updated 26 Jun 2024

Did you know that the rate of manual handling injuries is 58.9% in healthcare compared to 43.9% across all other industries (WorkSafe Victoria 2007)?

Workplace injuries are common in healthcare, and there are many occupational health and safety risks inherently associated with working in the health sector.

This article will look at how you can reduce the risk of injury when performing manual handling tasks.

Note: the intention of this article is to provide an overview of manual handling. However, further reading is essential. Refer to the resources listed at the end of the article for more information. It is crucial that you receive appropriate, practical manual handling training and supervision from your facility. You must also follow workplace policies and procedures and be familiar with relevant state/federal legislation.

What is Manual Handling?

Manual handling includes any activity carried out in the workplace that requires the use of force. It encompasses acts such as:

  • Lifting
  • Pushing
  • Lowering
  • Pulling
  • Moving
  • Holding
  • Restraining
  • Carrying

(SafeWork NSW 2023)

safe manual handling man using assistive lifting device

What are Hazardous Manual Handling Tasks?

Hazardous manual handling tasks are those that involve one or more of the following:

  • Repetitive movements
  • Sustained or repetitive force
  • High or sudden force
  • Awkward or sustained posture
  • Exposure to vibration

(SafeWork NSW 2023)

Manual Handling Risks in Healthcare

Manual handling can result in significant or irreversible injuries, particularly musculoskeletal injuries, which may include:

  • Soft tissue injuries e.g. hernias
  • Nerve damage or compression e.g. carpal tunnel syndrome
  • Back and neck injuries
  • Bone and joint injuries to hands, feet, shoulder, wrist, hip, knee, ankle etc.
  • Ligament and tendon damage
  • Muscle sprains and strains
  • Muscular and vascular disorders
  • Chronic pain
  • Acute pain

(Safe Work Australia 2018, 2023)

Factors related to manual handling tasks that increase the risk of injury include:

  • Fatigue (both physical and mental)
  • Loads that are unstable, unbalanced, or awkward to grasp and move
  • Inadequate staff training
  • Low staffing levels
  • Handling people or animals

(Safe Work Australia 2018; WorkSafe Victoria 2023)

safe manual handling man using assistive lifting device

Manual Handling Under the Strengthened Aged Care Quality Standards

Standard 2: The Organisation - Outcome 2.2: Quality and safety culture (Action 2.2.2) of the strengthened Aged Care Quality Standards requires an aged care organisation’s governing body to prioritise their staff's safety, health, and wellbeing - naturally, this includes manual handling safety (ACQSC 2024).

Additionally, Outcome 2.4: Risk management (Action 2.4.1) states that providers must implement a risk management system to recognise, document, address, and monitor risks to their staff (ACQSC 2024).

Managing Manual Handling Risks

Read: Risk Assessment and Management in the Home

Abide by these four steps to effectively manage hazards associated with manual handling tasks:

1. Identify hazards

  • Inspect the workplace
  • List the hazards you find
  • Talk to other workers
  • Review information about workplace injuries and incidents.

2. Assess the risk(s)

Identify the following in relation to the task:

  • Its weight
  • The movements involved
  • The duration of the task
  • Whether the task requires high or sudden force
  • Whether the task involves vibration.

3. Control the risk(s)

Using the hierarchy of controls, apply the following methods of hazard prevention in order of highest protection to lowest protection:

  1. Elimination
  2. Substitution
  3. Isolation
  4. Engineering
  5. Administrative actions
  6. Personal protective equipment.

4. Review risk controls

Implemented control measures should be reviewed and, if necessary, revised.

(WorkSafe.qld.gov.au 2020)

Methods to Prevent Injury During Manual Handling

  • If possible, lighten loads by breaking them into smaller quantities
  • Warm up before performing manual handling tasks
  • Take breaks
  • Allow time to get used to a new task
  • Explore ways to minimise lifting heavy items
  • Reduce or avoid bending, twisting, reaching movements
  • Move your feet rather than twisting your back
  • Give specific muscles a break by changing tasks during long shifts
  • Avoid rushing tasks
  • Use the appropriate equipment and assistive devices correctly, and use mechanical aids when possible
  • Do not use poorly maintained equipment or equipment you have not been trained for
  • Do not be afraid to ask for help and use teamwork
  • Watch out for and support peers to care for themselves in the workplace
  • Attend and advocate for regular training on manual handling
  • Abide by workplace manual handling policies and guidelines
  • Abide by the principles of proper body alignment and body mechanics
  • Learn how to recognise activities that have the potential for injury and act to reduce the risk
  • Avoid performing high-risk activities

(WorkSafe 2017; de-Vitry Smith 2021; vic.gov.au 2024)

Always question outdated procedures and practices, and don’t be afraid to speak up if you perceive a risk to you or your coworkers.

employer shows employee safe manual handling technique to prevent or limit risk of injury
Abide by the principles of proper body alignment and body mechanics.

Review Relevant State/Federal Legislation

You should be familiar with (and thus refer to) relevant state/federal legislation that stipulates the roles of both employers and employees.

All workplaces should have policies and procedures on manual handling and hazard, incident and injury reporting. The Work Health and Safety Act 2011 applies to employees and employers. Under the work health and safety legislation, breaches of duty could result in penalties.

Disclaimer: This article is to be used in conjunction with your organisation’s policies and procedures regarding manual handling. This article does not replace the theory of mandatory training regarding manual handling from your organisation. Appropriate theoretical and practical training in manual handling in your workplace should be provided by your employer.


Topics

References

Test Your Knowledge

Question 1 of 3

True or false: Handling a person is a factor that may increase the risk of injury in the workplace.

For Teams
Assign to your staff

Assign mandatory training and keep all your records in-one-place.

Find out more
Meet your educator
Content Integrity
Ausmed strives for the highest level of content integrity and accuracy in our educational resources.
Last updated26 Jun 2024

Due for review14 Apr 2026
Cite this resource